Your cart

The are currently no products in your cart!
Scorpion Merchandise
RS6 C7 4.0 TFSI Biturbo Quattro

Audi RS6 C7 4.0 TFSI Biturbo Quattro
2013 - 2018

Resonated Half System / Valved / Ascari RS / SAU087CF

Resonated half system with trims

Part No: SAU087CF




This product is not available in your country
170 x 120mm Ascari RS Tailpipe
70mm/2.75" Pipework
Lifetime Warranty
Fully Interchangeable


One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.

Our leading technicians have developed a 70mm / 2.75" half system for this king of performance estates. Our precision engineered systems are fabricated using CNC Mandrel bent large bore design which permits maximum performance by allowing a greater flow of exhaust gas, combine this with our premium high-thermal-tolerance T304 “aerospace” grade stainless steel construction that will endure through the harshest of conditions.

Two variants have been developed, a resonated version that is perfectly suited for those wanting a more civilised performance tone that can be better suited for daily driving and a non-resonated option for the all-out Scorpion soundtrack! Fitting seamlessly with Audi’s OEM front resonated section. For those looking to further enhance their driving experience by unleashing the all-out V8 soundtrack of their RS6, Scorpion offers front resonator delete flex pipes which means buyers can upgrade their vehicles exhaust in stages.

The system has been developed with a high flow profile and acoustic rear silencer to eliminate drone while enhancing peak performance all without compromising on the unrivalled sound of Scorpion system which creates the thundering V8 soundtrack. Our system gives the car a measurable reduction in weight when compared to the OE system this is an improvement that cannot be understated when machine meets road weight reduction is a key component of performance.

The half system comes fitted with our electronic valve plate to easily open and close the valves using the OEM actuator which works within the OEM ECU parameters. Closing the valves will give you a much quieter yet still deep tone from the Scorpion system, perfect for those long cruising drives, open the valves up however and you will hear the 70mm high flow half system to its fullest potential.

The Audi RS6 C7 system is offered with OE fitment which uses your existing OE diffuser mounted trims, or for those wanting to take their cars aesthetics to the next level our premium Ascari RS trims are the ultimate aesthetic upgrade. Manufactured using high-strength carbon weave for a flawless carbon look with a high-thermal tolerance T304 motorsport grade stainless steel insert to allow hot exhaust-gasses to pass through without discolouring or weakening the carbon exterior. This two-piece design is unlike many other carbon trim products on the market which allow the carbon to be subjected to the full heat from the exhaust causing premature wear and damage. The Ascari RS trims can be fitted with the OEM exhaust or any aftermarket exhaust system that is compatible with the inbuilt OEM tailpipes, this is because our product is a straight swap for the existing Audi trims. The Ascari RS trims can be purchased with a new cat-back exhaust or on their own as a standalone upgrade.


Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.

This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.



Ask a question

Technical Data

Technical information for SAU087CF
Product Type Half System
Resonated Resonated
Valve Yes
Fitment Years 2013 - 2018
Fits To OEM / Scorpion
Model Fitment RS6 Avant C7
Pipe Diameter 70mm/2.75" *
Tailpipe Ascari RS
Tailpipe Diameter 170 x 120mm
Shipping Dimensions 119cm x 60cm x 28cm
Notes Valves require OE motors
OEM Scorpion Change
Weight Difference 28 KG 26.95 KG -1.05 KG


Spares for SAU087CF | Please note these are not required when purchasing a new product.
Fitting Kit , Sau087

Fitting Kit , Sau087



Added to cart

Since 1992, we have been designing, developing and manufacturing stainless steel performance exhausts in the heart of Derbyshire, UK.

  • Scorpion Redpower Ltd, Unit 3 High
    Holborn Road, Codnorgate Business Park,
    Ripley, Derbyshire, DE5 3NW
Rated Excellent
We Accept