Frequently Asked Questions

We don’t make one of custom exhausts, however we are always after development vehicles for up-and coming models. If you’re willing to loan your vehicle for development, please submit your information on the relevant form.

Automotive Development    Motorcycle Development    Scooter Development

As long as you are the original purchaser and the exhaust is fitted to the vehicle for which it is intended then our motorcycle, scooter & cat-back / gpf-back car exhausts are covered by a lifetime anti-corrosion and manufacturing defect warranty in most markets. Please see the table below for a detailed breakdown. High flow sports catalysts are covered by a 2 year warranty.

Guarantee Period

Yes providing they are used on the vehicle for which they are intended.

Unless otherwise stated, we use 200 cell high flow sports catalysts.

Our exhausts can be used on track providing the dB killer is fitted (motorcycle product) or you have the resonated option fitted (car product) but this isn’t a guarantee as tracks have their own noise regulations so it’s always worth checking with them beforehand. For details of decibel readings taken when developing our product, please email technical@scorpion-redpower.com and we’ll assist where possible.

No, our exhausts are not EC approved. Please note that it is the buyer’s full responsibility to verify that the product which they intend to purchase complies with their own local/national laws.

Yes, we have a network of approved and trusted fitting centres! Visit the Dealer Locator and look for any Scorpion Dealer marked as a 'Red Power Centre'

In some cases the original exhaust has to be cut to remove it from the vehicle or to fit our product. Where this is required detailed instructions are supplied.

Everything required to fit your exhaust is supplied within the kit, sometimes a silicone based sealant may be required to ensure a perfect seal on the joints.

Each vehicle has its own characteristics so it’s not possible to state a specific amount. A general figure of between 5 – 10% would be expected but this can vary due to age and condition of the vehicle.

Yes but this is dependent on the extent of the damage and can usually be assessed if images are emailed in to our technical department technical@scorpion-redpower.com

We only use the very best high performance materials. T304/316 stainless steel, Grade 1 titanium and high temperature carbon fibre and high grade mild steel in components such has heavy gauge mounting flanges.

We only sell direct on this website to certain countries where we do not have a distributor established. You will see a 'Add To Cart' button on product pages if you are able to purchase direct. If not, you will see a 'Where to buy' button which will take you to our dealer locator

Yes, please view our Returns Policy to view the requirements and procedure for returning a product.

No, we send all EU orders DDP (delivered duties paid). This means the consignment is cleared by us, with any duties and VAT pre-paid. The total amount you to pay at checkout includes VAT at your local rate. You will not pay any extra duties or taxes when the consignment is cleared at customs.

If all the items on the order are in stock, we aim to dispatch the same working today - providing the order was placed before the cut-off time. The transit time is shown during checkout next to the delivery method. Please note that these are estimates from our couriers, and once the item has left our despatch facility we have no control over this. Please view our delivery information page for more information. If an item is out of stock, an estimated manufacturing date will be shown on the product page.

The main difference is whether a silencer is included or omitted in the centre section of the exhaust. A non resonated system doesn’t include a centre silencer so will be significantly louder than the standard exhaust whereas a resonated system includes a centre silencer so will only be slightly louder than the standard exhaust.

If fitting a catalyst/DPF back system then no modifications are required. A remap will be required when fitting turbo back high flow sports catalyst or turbo back catalyst replacement pipe. Secondary high flow sports catalyst and secondary catalyst replacement pipes do not require mapping so will run on standard settings.

Yes, these are available for models that they are intended to fit. If you’re not able to identify the exact one you require then email images showing the outlet of your Scorpion exhaust to our technical department who will be able to assist. technical@scorpion-redpower.com

To claim against the crash/impact damage guarantee contact your dealer with your proof of purchase. If found to be covered under the terms of the guarantee your dealer will arrange for a replacement exhaust to be supplied at 50% of the retail price.

Due to the internal construction and high specification of the materials used our silencers never require re packing and are covered under our life time guarantee.

All our motorcycle products are develop using our state of the art dyno facility. Power gains and fuel mixtures are assured which means factory setting do not have to be adjusted. Just fit and ride.

Yes, these are available for models that they are intended to fit. If you’re not able to identify the exact one you require then email images showing the outlet of your Scorpion exhaust to our technical department who will be able to assist. technical@scorpion-redpower.com

All our scooter products are develop using our state of the art dyno facility. Power gains and fuel mixtures are assured which means factory setting do not have to be adjusted. Just fit and ride.

Due to the internal construction and high specification of the materials used our silencers never require re packing and are covered under our life time guarantee.

Our cookie policy can be found here.

Our Terms & Conditions of use can be found here.

If you discover any defects, omissions or missing imagery; please report this direct to our IT Manager (thomas.brentnall@scorpion-redpower.com)

Our website privacy policy can be found here.